How to choose Protective Film For Aluminum Profiles
Aug 03, 2021
1. Protective Film For Aluminum Profiles should be inert to the surface of the protective material:
There can be no chemical reaction between the Protective Film For Aluminum Profiles and the surface of the protective material, let alone corrosion and pollution;
2. The surface protective film should have good adhesion to the surface of the material to be protected:
In the process of material processing or transportation, the surface protective film must not be warped or peeled off. Many protective films on the market are actually sticky or have a certain electrostatic adsorption capacity. Attach the surface of the article.
3. The surface protective film has weather resistance and stability on the surface of the material to be protected:
After a long time of use, the peeling strength is not obvious, and it is very easy to peel off directly, and after peeling off, there is no residual glue on the entire protected surface.
4. The surface protective film has good processability on the surface of the protected material:
The surface protection film must meet the processing requirements of any protected material.
Before the development and application of surface protective film, the protection of the surface of the article basically relied on the application of oil-proof and waterproof solvents. This method is very low in efficiency and the protective effect of the material is not very obvious. The most important thing is The thing is, there will be traces left on the surface of the article.
It will have a serious impact on the appearance of the entire material, and the surface protective film will not have the above-mentioned situation, will not leave residual glue on the surface of the article, and will not cause traces of pollution on the surface of the article, ensuring the protected article The whole surface is still bright and beautiful, which is also the biggest advantage of the surface protective film.
