Steps in the process of applying the protective film

Protective film is a very good product. Don't look at it as a thin layer, but it can protect the product very well. Because of this, protective films are used on many products. In terms that are closely related to our daily life, protective films are affixed to the screens of mobile phones, computers, TVs, and so on.

As a protective film, it is not simple to apply it. Before the application, the surface must be thoroughly cleaned, and it must be pasted in the correct way. Otherwise, it is easy to generate air bubbles and affect the appearance after the application.

1. Determination of direction

Protection film is generally composed of three layers, so when pasting these three layers of protection film together on the screen surface, in order to determine the direction of posting.

2, surface cleaning

The cleanliness of the protected surface has a great relationship with the normal use of the protective film. If the dirt on the surface is not completely removed, the protective film cannot fully contact the screen, and it is easy to fall off. So the second step is to wipe the fingerprints, dust, oil stains and dirt on the screen with a fiber cloth.

3. Uncovering method of protective film

When removing the protective film, you must first pinch and move the sticker, and then remove the protective mold by 1/3, instead of removing all. Then point the exposed interlayer to the screen, and carefully align the edges with the edge of the screen. Then slowly peel off the entire protective film, and at the same time align all the exposed interlayer films with the edges on the screen.

4.Removal of air bubbles

Immediately after completing the above steps, you will find that there are many small air bubbles in the protective film. At this time, you must remove the air bubbles with a flat blade to prevent residues and reduce the use effect and service life of the protective film. 

https://www.xmlfilm.com/